aboutsummaryrefslogtreecommitdiffstats
path: root/CCNP/ROUTE/OSPF/GNS3Vault/OSPF OVER FRAME-RELAY POINT-TO-MULTIPOINT.txt
blob: c5f6686d391f1d8afdd70dbbe1322403570df903 (about) (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
OSPF OVER FRAME-RELAY: POINT-TO-MULTIPOINT
WRITTEN BY RENE MOLENAAR ON�24 JULY 2010. POSTED IN�OSPF
SCENARIO:
As the senior network engineer for a Dutch fishing company you are responsible for connecting all the different branch offices to the main network. The WAN technology you are using is�Frame Relay, and you need to run�OSPF�over this WAN connection.
GOAL:
* The�frame-relay�switch has been preconfigured for you, as you can see in the topology picture the following PVC's has been configured:

Router Barracuda to Salmon:�
Barracuda: DLCI 102
Salmon: DLCI 201

Router Barracuda to Herring:
Barracuda: DLCI 103
Salmon: DLCI 301
* Router Barracuda is the "Hub" router and the other 2 routers are the "Spoke" routers.
* Do not change any configuration on the�Frame-Relay�switch.
* Configure the following IP addresses:
Router Barracuda:
S0/0: 192.168.123.1 /24
L0: 1.1.1.1 /24

Router Salmon:
S0/0: 192.168.123.2 /24
L0: 2.2.2.2 /24

Router Herring:
S0/0: 192.168.123.3 /24
L0: 3.3.3.3 /24
* Configure all serial interfaces for encapsulation Frame-Relay.
* Disable�Frame-relay�inverse arp�on all serial interfaces.
* Configure the correct frame-relay map statements on all routers and make sure you can ping every IP address.
* Configure the�OSPF network type�to "point-to-multipoint" on all serial interfaces.
* Configure OSPF on all 3 routers, make sure you have full connectivity. All IP addresses including the loopbacks should be reachable.
* You are not allowed to use the "neighbor" command in the OSPF configuration.
IOS:
c3640-jk9s-mz.124-16.bin