BGP Timers
You are a film producer and parttime network engineer. You use BGP to connect two sites to each other but you feel
things are a little slow. Let's see if you can tune up some of those BGP timers.
All IP addresses have been preconfigured for you.
Configure EBGP between AS 1 and AS 2.
The BGP scanner should run every 30 seconds on both routers.
Ensure both routers don't wait till the next BGP advertisement-interval but send updates immediately.
When there is no activity after 15 seconds the BGP peering should be dropped.
You need to register to download the GNS3 Topology File. (Registration is Free!)